Welcome to the world's first and only
Automated Anniversary Clock Identification System

---

Devised and produced using information from Anniversary Clock Identification by Mervyn Passmore, with the permission of the author.
Copyright Mervyn Passmore, 2009.
EN FRANCAIS
START AGAIN
M &P

---

Anniversary Clock Identification for Kern & Sohne

Kern movements almost always have a version of the KS logo, unless marked with K.u.S followed by the movement reference.   Model Recognition tips Identification Image NONE OF THESE Refer to 'Anniversary Clock Identification' by Mervyn Passmore Kern K.u.S. MIV Winder on the right side of the back-plate, marked with the KS logo or K.u.S. MIV     Kern Midget 44mm x 54mm 21mm gap Winder on the left side. 44mm x 54mm. Often marked K.u.S. PI     Kern Miniature 44mm x 60mm x 20mm gap, left-hand winder, eccentric nut 44 x 60mm, winder on the left, with an eccentric nut adjuster     Kern Miniature 44mm x 60mm x 20mm gap, left-hand winder, screwed bracket 44 x 60mm, winder on the left, with a screwed bracket adjuster     Kern Miniature 44mm x 60mm x 20mm gap, right-hand winder Winder on the right side of the back-plate, marked with the KS logo or K.u.S. MIV     Kern Standard early, 69mm x 93mm x 30mm gap 69mm x 93mm plates WITHOUT bracket screw-holes between the lower plate retaining PINS.     Kern Standard late, 69mm x 93mm x 30mm gap 69mm x 93mm plates WITH bracket screw-holes between the lower plate SCREWS.     Kern Standard narrow 44mm x 93mm x 30mm gap (SIV) 44mm x 93mm. Sometimes marked SIV     Kern miniature, remontoire A battery operated remontoire clock     If you need more information on how to identify your movement, consult Anniversary Clock Identification by Mervyn Passmore

Extracts from the 350 page Anniversary Clock Identification by Mervyn Passmore. Copyright by Mervyn Passmore 2009. All rights reserved. No part of the content of these online pages or the book may be reproduced or transmitted in any form or by any means without the written permission of the author.